好吧，在本课中，我们将了解如何导入时间并查看 HDMI 上的反馈。
All right in this lesson we'll see how to inport the time and see the feedback on the HDMI.

你可以在屏幕上看到我们这次要求 15 秒，这是 Bactine 的壮举。
You can see on the screen we have this time and we ask 15 seconds and this is a feat Bactine.

好吧，电机已关闭。
All right the motor is off.

如果我按下“开始”按钮，此时时间将会增加，最长可达 15 秒。
And if I press the Start button at this time will increase and this will go up to 15 seconds.

当它流血15秒或者辞职时。
And when it bleeds 15 seconds or resign.

所以这实际上是我预设的时间，这是一个运行时间。
So this is actually my preset time and this is a running time.

好的。
All right.

因此，让我们看看我们如何才能创造出这样的义务，即你必须从我的年龄开始，用这里的时间来养活那段时间。
So let's see how we can create this obligation in which you have to feed that time from the age of my and with the time here.

好的。
All right.

因此，要做到这一点，您可能已经猜到，在 Beres 中，使用计时器的逻辑是 D on 块，而在 B.T 中。
So to do that you might have guessed that in the Beres the logic where using a timer is a D on block and in the B.T.

我拿了W电阻并做了。
I took the W resistor and did.

好的，双电阻，如您所见，这里是 15 秒。
OK double resistor as you see this is 15 seconds here.

因此，在此期间，您必须转到我办公桌边缘的这个 IO 字段来执行此操作。
So in the interim you have to do this go to the edge of my desk this IO field here.

好的。
All right.

我们需要IO费用。
We need to IO fees.

好的。
OK.

现在，如果您想在这里写一些文本仅供参考，我将接受文本输入，并且我可以在右侧边缘写计时竞赛。
Now if you want to write some text here just for the information I will take a text input and I can write timing race in an edge right.

好的。
OK.

您还可以从这里增加和减少其大小。
And you can also increase and decrease its size from here.

好的。
OK.

这是菲尔。
So this is Phil over here.

这是我们预设的时间。
This is our preset time.

所以我会写它。
So I would write it.

BT 可以将其边数增加 16，然后说“确定”，我复制粘贴这个，我会写它，因为这是我的估计时间。
BT can increase its sides by 16 and then say OK and I copy paste this one and I would write it as it is my estimated time.

或者，也许您正在运行时间，只要您想调用它即可。
Or maybe you are running time whenever you want to call it.

皮蒂就在这里。
So this is here Petey's here.

现在你可能会想象，如果我再次谈谈我的观点，这里的东西是空的，那么这是你的比蒂的，所以你可以谈论这个。
Now you might imagine that if I go to my views again this thing over here empty then this is your Beatty's so you can talk about that.

BT 好的这个。
BT OK this one.

你可以在你的电脑上找到它。
You can get it your pc go here it.

这确实可以。
This is indeed OK.

这个做完了。
This is done.

现在您必须注意到一件事，您看到的默认值是 15 秒。
Now you must notice one thing that you see this default as it's written that's 15 seconds.

好的，但是如果我在这里只取一个，如果我在 Chimay 中写一个，你会注意到这一秒。
OK but if I take here just one in my if I write one in my Chimay you will notice that one second.

但在这里你可以看到一些小数。
But here you can see some decimals.

假设如果我直接找到你，按回车键，这里是 1 毫秒。
Suppose if I went right to find you one press enter and here it is 1 milliseconds.

在这种情况下，如果你走到边缘，这是如何发生的，为什么你必须设计一些小数，因为 Pusey 时间的默认输入是毫秒。
How this is happening in that case if you go to the edge and why you have to design some decimals because the default input to the Pusey time is milliseconds.

好的。
OK.

所以这里必须取三位小数。
So you have to take three decimals here.

好的。
All right.

如果你注意到这里并将其混合，你就会得到三位小数。
If you notice here and mix it you have three decimals.

它的意思是。
It means.

现在，如果我们输入 1，则输入将为 1 0 0 0，应该是 1 秒。
Now if we enter one the input will be one 0 0 0 which should be 1 seconds.

因此，如果您在此输入中输入一个，则将是一秒。
So if you're entering one in this input it would be one second.

如果输入一点零零一，则将是一秒一毫秒。
If you enter one point zero zero one it would be one second one millisecond.

好吧，同样在有限的时间内我们必须给出 Daag。
OK so similarly in its limited time now we have to give that Daag.

现在，对于 E.T. 来说，这又是什么呢？
Now what is it that for E.T.

我们必须找出你知道人们在哪里看到程序锁，然后在系统日志中找到计时器的数据库。
we have to find out you know where people see go to the program lock and then the system log where you find the database for the timer.

在这里你可以找到 E.T.
And here you find E.T..

所以取它的输出。
So take its output.

在这里，如果您想以毫秒和秒为单位显示时间，我希望您采用三位小数。
And here again if you want to display the time in milliseconds and in seconds I would prefer you to take three decimals.

好的。
All right.

现在，如果您想正确地说明时间反馈以秒为单位，也许可以。
And now here maybe if you want to get it right that time feedback is in seconds.

好的。
OK.

使操作者不会感到困惑。
So that the operator will not be confused.

好的。
OK.

所以你可以在这里写下事实信息。
So this you can write a factual information here.

所以让我们下载这个并再次到达那个时间一切都OK。
So let's just download this and reaching that time again everything's OK.

因此，当您不知道您的 my my 中的这个时，这将完全按照我们开始的方式进行。
So when you don't know this one in your my this will do exactly what we started.

最初我们最初看到的当然还有一些更多的文字。
Initially what we saw initially with some more text of course.

那么让我回到我的平均值或 B。
So let me go back to my mean or B.

这是我的相机。
Here is my camera.

好的。
OK.

所以现在 P-T 给出为一毫秒，所以这里它是零点零零 1。
So right now the P-T is given as one milli second so here it is zero point zero zero 1.

好的，我们将其更改为五点五。
OK let's just change that to five point five.

所以这将是五点五秒，因此您可以在 500 毫秒中看到这五秒。
So this will be five point five seconds so you can see that five second in 500 milliseconds.

好的。
OK.

所以我们现在就放水吧。
So let's just run the water now.

机动车辆走的是准确的时间，你可以在这里看到时间，上面会显示五点五秒。
The motorable take the exact time and you can see the time here and it will be on it five point five seconds.

我希望这是有道理的。
I hope this makes sense.

这就是我们正在阅读的反馈。
So this is the feedback we are reading.

好的。
All right.

现在我想提一件事，如果我点击这个显示这个，好的，这是不需要的，因为那是您的估计时间。
Now there is one thing I want to mention if I if I just clicked this one shows this OK this is this is not required because it was that was your estimated time.

这不是必需的。
This is not required.

因此，在这种情况下，他们要做的就是返回您的屏幕并喜欢这个，并将其更多地用作唯一的输出。
So in this case what they're going to do is go back to your screen and like this one and use this more as the only output.

好的。
OK.

所以这只会显示该值。
So this will only display the value.

好的。
OK.

也许这是你的输入输出板。
Might this is and this is your input output board.

它会读取和写入两者。
It will read and write both.

所以这应该是输入输出。
So this should be input output.

这应该只是输出。
This should be only output.

现在让我们看看区别。
Now let's see the difference.

当我们将其更多地更改为输出时，我们会得到什么。
What we have when we change that more to output.

您可能无法更改 E.T. 中的值。
You may not be able to change the value in E.T.

就像这是必要的 好吧，现在就是现在，在这里你看到这是克里斯和这个的同一时间。
like for this was necessary All right it's right now and here you see this is the same time Chris with this one.

什么都没发生。
Nothing happens.

但这里是作弊，因为这是心情好的时候。
But here it is cheating because this is in a good mood.

如果我把它往前按，就会有四秒钟。
If I press this forward it will be four seconds.

可能很容易只想再次见到。
It might be easy to just want to see again.

你还好吗。
Are you OK.

如果我进入这里，那么你和我认为这很大很大有 560 毫秒。
If I enter here that's a so you and I thinks this is big big has 560 milliseconds.

好的。
OK.

如果我在 45 毫秒内写下第二秒之前的四位或五位，那么它会上升到小数点后三位。
The it goes up to three decimals if I write or four or five the school before second for 45 milliseconds.

如果你不想要这个梅利斯，如果你刚刚赢得了你知道，如果你的时间范围不是以秒为单位，而只是毫秒，你可以移动小数点，你可以直接输入毫秒。
If you don't want this Melis if you just won the you know if your time range is not in seconds it's only milliseconds you can move the decimal points and you can just put your milliseconds directly.

好的。
All right.

因此，如果您愿意，这取决于您想如何使用它。
So this is up to you how you want to use it if you want.

确切地知道这是一小时，所以你就可以了。
Exactly know it's a one hour so you it.

你可以在这篇文章中看到这是一小时。
And you can see in the piece it's one hour.

正确的。
Right.

因为范围扩大了一倍。
Because the range is doubled.

所以你可以延迟一个小时大约写三六三千六百秒。
So you can put one hour delay about writing three six thirty six hundred seconds.

在这里，我们可以在几秒钟内完成小任务，这样操作员就不会感到困惑。
And here we can make right in the small in seconds so that the operator does not confuse.

所以我希望这节课对您显示新字符和输入值非常有益。
So I hope this lessons this lesson is very beneficial for you to display the new characters and enter the values.

让我们看看下一个列表中有什么。
So let's see what we have in the next list.

谢谢。
Thank you.